PDA

View Full Version : LED/LCD/DM3

Pages : [1] 2 3 4
  1. Bolt Kit Switch Settings
  2. Animated Bolt Firing Sequence
  3. Stock and Bolt Kit Exploded
  4. Matrix Bolt exploded
  5. Proper bolt removal and lubing
  6. Solenoid/manifold removal
  7. Trigger Jobs 101
  8. Solenoid Polarity..Does it matter???
  9. Setting LCD Forward and Back Pulse
  10. walking the trigger i get major ball drop.
  11. My lcd wont turn on
  12. GUN WONT FIRE PLEASE HELP
  13. matrix not shooting after 3 shots
  14. Can't crono over 250
  15. double feeding problem!!
  16. Dye trix eye problem.
  17. Can't get bolt out of gun
  18. puffs of air coming out of back plate w/ each shot.
  19. ABS causing problems
  20. Gun 20 chip
  21. what else can i do to my matrix
  22. eyes ripped
  23. red bolt~plunger into back plug
  24. gun wont fire....help
  25. Matrix detents not staying in and LPR not setting correctly.
  26. trigger spring in or out?
  27. Board reading low bps??
  28. Loose Breach
  29. dye trix prob.
  30. Matrix Setup Smashing balls
  31. red bolt image bolt
  32. Eye is not reading.
  33. LCD Not Turning On
  34. Bolt Scrape
  35. It just will not shoot...
  36. Leak from eye area
  37. SOUP
  38. When to change the battery on the DM3?
  39. Delete ABS???
  40. works w/out oring
  41. matrix schematics
  42. Board problems?
  43. Removing the front wall and beercan
  44. Trigger Not Staying in place.
  45. LED not turning on
  46. Toxic Problems
  47. FSDO in Dye trixes
  48. pressure problem with my trix
  49. Thinking of sending gun back to Dye.
  50. lcd matrix leaking...
  51. LCD screen not working
  52. Broken Eyes
  53. Soldering on the Noid
  54. wierd bolt prob/ LCD Board question
  55. funny problem with temperature on lcd
  56. bolt in breech.
  57. Paint on LED board...
  58. baddddd efficiency
  59. Microswitch
  60. The mother of all inconsitency problems
  61. Still shooting blanks.
  62. Freefloating Eye Carrier?
  63. solenoid????
  64. Bent Bolt
  65. Weird fps issues.
  66. Three Questions
  67. Pinching I think
  68. Gen-E Matrix Chopping paint
  69. Trix help, I've tried everything!
  70. first shot VERY hot
  71. bolt stick
  72. HELP! air coming from back plate
  73. FPS problem!!!!!!!!!!
  74. Unique prob...blinking light on LED
  75. Bolt stuck forward/No air going into bolt...
  76. Trigger Trouble... not the kind you'd think
  77. eye carrier screw stripped! and doby eyes question
  78. Help with LCD board -- random piece fell off!
  79. Which matrix is it?
  80. LCD board--help please!!!
  81. DROP OFF !!!
  82. breaking paint
  83. trigger frame screws
  84. board truning off sporatically...really wierd please help.
  85. Matrix drop off
  86. Eyes wont turn on !?!?!
  87. Bolt is acting crazy when i air up my gun!
  88. consistency questions
  89. First shot drop off...
  90. weird drop off issue
  91. Horrible efficiency...I think
  92. Can i get my trix custom fade painted anywhere?
  93. Low FPS with CP Reg
  94. Full Auto problem
  95. Strange chopping, bolt tip o-ring...
  96. ASA and Breech WIGGLY HELP!!!!!!!!!
  97. stem o-rings possibly the cause of FSDO?
  98. not shooting
  99. first shot drop off?
  100. Trigger and the Spring
  101. leak out of the trix
  102. stock board back pulse
  103. velociity problem
  104. Crushing the micro switch...
  105. quick question...
  106. eh...manifold/noid problem...
  107. did seach but cant find how to get stripped screws out
  108. LCD chops bad!
  109. any issues with adding TadaoV4.0 and eyes to an led?
  110. my matrix is sick
  111. Board Turning Off Persisently
  112. shooting / board issue
  113. Need part number for Doby eye connector, battery connector
  114. Need a lot of help with my new trix and its settings
  115. Eye staying off
  116. Chopping on a Non-Aced LED
  117. problem with settings on my lcd matrix
  118. 1st Shot from Matrix doesn't shoot through barrel..2nd+ do
  119. question with my Gen-E LCD board
  120. Eye Carrier & Compulsive Eye Harness
  121. LED Trix Problem
  122. what is stock ROF on 03 LCD TWC trix?and does it have eyes?
  123. Settings With Halo?
  124. Long pull with activation at the begining?
  125. Slide to LED Conversion
  126. Matrix: The Complete Teardown
  127. 2K4 FSDO
  128. eyes not working
  129. Full Auto on Stock Trigger
  130. where to send gun to get abs installed ?
  131. Lcd Battery conectors??
  132. 2k4 LPR and drop off
  133. HELP!! my new gun wont turn on
  134. ABS
  135. evolve settings for led
  136. New to trix's had some chopnig today, what do i change?
  137. Wierd Stuff
  138. Are there different kinds of detents?
  139. drilling eye carrier
  140. Matrix Recharging Very Slowly
  141. strange velocity problem
  142. Technical information on matrix air volume and consumption..
  143. Technical information on matrix air volume and consumption..
  144. Great efficiency but small leak, little help..
  145. low shot count
  146. !Ive read everything about inconsistant velocity, Any ideas?
  147. Small leak, what's it coming from?
  148. Bolt Cycling problems with 2k2 led trix
  149. Asa screws
  150. My Bolt Setup
  151. Gun Won't Fire at all; HELP!
  152. Extreme FSDO
  153. Strange First Shot Drop Off...
  154. very bad efficiency, help plz
  155. VERY Slow Recharge Problem
  156. Can't Fix loose ASA
  157. Weird Matrix firing problems
  158. beer can removal
  159. Unstoppable Leak
  160. Recharge rate
  161. leak barrel,back plate and a ?
  162. chopping bad... tried everything
  163. 2 balls on first shot!!??
  164. Best Method For Cleaning Eyes?
  165. input pressure prob ~ Need Help
  166. One Shot- One Kill
  167. gun kicks
  168. Plain Dye Matrix, should I get a Tadeo?
  169. 2 problems
  170. Eyes wont turn on?
  171. lots of problems witha a dye trix
  172. Setting the pulse for my Trauma
  173. Inconsistency problems..out of ideas
  174. 2nd shot + drop off
  175. ABS Turned Off
  176. dwell and debounce
  177. ASA OFF
  178. setup
  179. New dye matrix solenoid #
  180. Matrix is extremly inaccurately
  181. all kinds of leaks on my LED
  182. Too slow max. 250 Short range Matrix :(
  183. disassembly reasembly puzzle
  184. FP and BP settings? again... sorry
  185. big problem, possibly the noid?
  186. Velocity spikes can kill...!
  187. Gun will not shoot
  188. Mmm.. matrix tastey... almost... a few questions. :D
  189. shootdown problems
  190. Broken gun
  191. Matrix Loading Problem!! Detents? Breach?
  192. chopping
  193. leaking caused by new LPR
  194. Matrix - Not turning on
  195. Shaking sound inside bolt
  196. GEN E REG WONT REG!!!!!!
  197. LCD Board ID
  198. Matrix Cheat Sheet?
  199. NO cycling at all.
  200. dye matrix lcd Hpr and Lpr reg problems
  201. hi leak erf....
  202. Gen-E trix in trouble
  203. Any thing and every thing to get more shots
  204. dye matrixr not shooting right
  205. is there good break in settings for a new DM3?
  206. battery connector???
  207. my new lcd 2k4 smoking?!?!
  208. Followed Leak Guide, Still have a leak.
  209. LCD wont turn on
  210. Major Efficiency Problems
  211. efficency question...
  212. Dye Lcd Battery keeps running down even when gun is off.
  213. Another trix problem....
  214. rollback?
  215. Gun20 probs
  216. eye question
  217. gripframe
  218. Bolts stuck forward not inline or lpr
  219. dye trix not shooting straight
  220. Micro spring solenoid woes
  221. FSDO happens every 20 seconds, need help
  222. Who makes a silver tophat?
  223. trix tips
  224. Shortening LCD trigger
  225. Aardvark frame and 5.0
  226. Major Matrix Upgrades
  227. Matrix spiking
  228. Bolt Stick? the bolt is pinching paintball in breech
  229. Triggerjob gone wrong?
  230. Need help gun not constant
  231. Many Problems
  232. DM3 Just Wont Shoot
  233. ABS and Evolve...
  234. Plug and Socket stuck together
  235. Matrix is a being a major Piece HELP!!!
  236. lube build up
  237. quik pulse question
  238. Won't cycle on less than 200 psi???
  239. Unkown problem with my Trix
  240. Gen-E ** 1st shot fires, then bolt moves but nothin' else...
  241. Newbie ????????? On Bolt oiling
  242. Soliniod Wires Are Cut!!!
  243. Simple LPR problem. Not sotkc inline from dye -=inside=-
  244. To whom should I send my Matrix for repairs?
  245. Trigger Bounce!!!
  246. ball problem
  247. LPR set a little higher...
  248. Back Pulse or is it really dwell time?
  249. LCD board question
  250. Front Wall & Breach