Halo B questions [Archive]

matrixpballer

11-14-2003, 08:46 PM

First of all, I just want to say that I have no experience with a Halo.

My first question is where I can find the serial # for the warranty card? (I bought it used with a blank card)

Second, whenever I turn it on with paint in, it loads the balls into the feedneck, then it pulses about 5 times, then the red light starts to blink. So after about 5 seconds of it sitting idle, it stops working.

Third, where is the eye located in the tube? I looked but wasnt able to see it.

-Drew

Paintball360

11-14-2003, 09:36 PM

Serial number is located in the battrie compartment. As for the red light check the battires they could be dead.

matrixpballer

11-14-2003, 09:42 PM

No, its not the batteries. I just replaced them with fresh ones...twice.

sdramones

11-14-2003, 09:50 PM

The eyes are located just below the bend of the neck, inserted into holes. Check below the Zip Tie in the pic. Clean the eyes and see if it helps any.

http://www.odysseypaintball.com/images/tips/feedneck.jpg

Odyssey Paintball: http://www.odysseypaintball.com/

HALO B: http://www.odysseypaintball.com/halob.html

Assembly / Disassembly: http://www.odysseypaintball.com/halobassembly.html

matrixpballer

11-14-2003, 10:12 PM

Thanks Sean, I completely forgot to check their site for info. :oops:

matrixpballer

11-15-2003, 10:40 PM

I think the eye is not working. When I turn it on it pushes the paintballs into the feedneck, ok. But then, it wont stop pushing and after about five seconds of it "pulsing" the right and green lights start flashing and the motor stops spinning.

ErikHandler21

11-23-2003, 12:42 PM

what color paint ru using? it wont read dark color paint , u have to use solid colors

matrixpballer

11-23-2003, 01:28 PM

I already fixed it, thanks for the info though.

Jonny Matrix

11-23-2003, 02:13 PM

How did you fix it? Im having the same problem with mine. I think it has to do with my no-rise. I tried a friends halo on my gun and it did the same thing.

matrixpballer

11-23-2003, 02:58 PM

Im not sure about the no rise...cause I have a low rise. But the problem for me was that the eyes just werent sensing anything due to a crapped out wire. So I just fixed the wire.

Dreadful

05-31-2004, 10:15 PM

Read what I posted in this thread 5min ago, it will solve your problems:
http://forums.matrixowner.com/viewtopic.php?t=8111

Preacher06

06-11-2004, 12:16 AM

curious how you fixed the wire. . . just in case i may have to deal with the same prob in the future.