dmc_owner
12-24-2005, 09:42 PM
Alright. So I am going to do the tophat mod to my DMC right now. I am wrapping 5-7 wraps of electrical tape around the tophat, just like I've seen. But I have a few questions.
1.) Once I do this, I have heard that I should raise my input pressure, lower my dwell, and I can adjust my LPR. However, I don't know what to change these too or how far to adjust my input pressure from the position of being turned all the way out. Same with the LPR. Any help on this?
2.) What is a good setting for Dwell when I have the Tophat mod?
3.) How do I turn my DMC off PSP ramping? All of my DIP switches are Off except #1, which is on. But no matter which combo I try, I can't get the ramping to turn off. I just want it to be on NPPL legal semi-auto.
If someone could answer my questions, I would greatly appreciate it. I am not getting very many shots off 1000 psi at all on a 90/4500. Right now I get about One and a half, to Two hoppers per thousand psi. Please help me out.
1.) Once I do this, I have heard that I should raise my input pressure, lower my dwell, and I can adjust my LPR. However, I don't know what to change these too or how far to adjust my input pressure from the position of being turned all the way out. Same with the LPR. Any help on this?
2.) What is a good setting for Dwell when I have the Tophat mod?
3.) How do I turn my DMC off PSP ramping? All of my DIP switches are Off except #1, which is on. But no matter which combo I try, I can't get the ramping to turn off. I just want it to be on NPPL legal semi-auto.
If someone could answer my questions, I would greatly appreciate it. I am not getting very many shots off 1000 psi at all on a 90/4500. Right now I get about One and a half, to Two hoppers per thousand psi. Please help me out.