TOP HAT MOD change

[Rockyboarder]

hey, my friend just put the top hat mod on my PROTO MATRIX 05..Im using caps because its not a DM..now, i was wondering what other people use for LPR settings and HPR settings and Dwell settings on the proto trix 05 when using only the top hat mod....marker is bone stock...thanks for the help

[Matrix v.1]

About 2 1/2 - 3 1/2 turns out on the LPR instead of 4. For the HPR, it depends on the field's FPS setting, somewhere around 150-190 PSI after the mod.

[Rockyboarder]

ok...but the dwell settings are the same as stock? (1 8 )

[Matrix v.1]

Lower it to 15.

[Rockyboarder]

and i should be seeing an increase in efficiency correct?

[Raydee]

Not to try and change the subject but has anybody tried the Lucky top hat rings to do this mod??

[silverbara]

and i should be seeing an increase in efficiency correct?

Yep, Dwell down, efficiency up, vise versa.

As you go to low with dwell, you'll see drop off and inconsistancy(due to chamber not empting completely) - so dont go right on the edge, variables change, and it won't be worth the few extra shots.

[Rockyboarder]

alright thanks well..i just purchased an EVOLVE bolt kit for the proto trix so i think im good